call: (678) WAY-SAW4

Big Blue Saw Blog

General Updates

Spline support for DXF files

We now support the SPLINE entity on uploaded DXF files. Splines are only available in the DXF specification R13 or later.

Google Checkout feedback confirms it: our customers love us

{yuizoom ratings-june2009-small.png|ratings-june2009.png} Most stores that use Google Checkout have listings on Google Shopping that shows their seller rating. We don't sell stuff that could be listed there, though; everything we make is custom! Thus, you, our customers, can't see our ratings. So I thought I'd post our ratings here for all to see.

Our average score is 4.8/5. Nobody has rated us lower than a 4/5. That's pretty darn good. Thank you, customers!

Introducing low-taper waterjet cutting


We are proud to announce today that Big Blue Saw is now offering a brand new service: low-taper waterjet cutting. We have had many of our customers tell us that they needed a more accurate machining technology than what we offer with our ordinary waterjet machining, and this should help meet their needs.

In the image above, you can see the effect of low-taper waterjet cutting. Both parts are identical in design (the "butterfly" example from the part upload page) and stock material (0.75" thick 6061 aluminum), but the part on the right is made with low-taper waterjet cutting. Each of the parts above rests on its machined edge on a flat surface. The face of each part is shown placed against a machinist's square. The part on the left deviates by a couple degrees. This is referred to as taper. However, with our low-taper waterjet cutting process, the taper is eliminated and the part sits perfectly flush with the square.

Many of you will want to know if you should order low-taper waterjet cutting or stick with our standard service. In general, our standard service is less expensive and is appropriate for many uses. However, for thicker parts and for pieces which must connect or touch other parts along the machined edge, it's very worthwhile to order low-taper waterjet cutting.

For instance, you probably want to use standard waterjet cutting with these types of items:

  • Instrument panels
  • Signs
  • Stencils
  • Decorative pieces designed to be viewed straight on to the original material face
  • Enclosure faceplates

Low taper waterjet cutting works better for:

  • Gears
  • Bearing blocks
  • Thick parts that fit or slot together along their cut lines
  • Thick pieces that must rest on the machined edge

To order a part made with low-taper waterjet cutting, just choose the "low-taper" option when adding the part to your shopping cart. That's it!

For more information, see our FAQ on low-taper waterjet cutting.

Roko's Amazing Quadruped Robot


From the blog of Canadian robot builder Roko comes this beautiful work in progress, a quadruped robot made using parts from Big Blue Saw.

Roko writes in one post "I'm still happy overall with the water-jet cutting, and would recommend it to anyone trying to make more complicated shapes or numerous parts. I wouldn’t have been able to make all of the more complicated/curvy cuts by hand as precisely and quick as the water-jet service does."

Login Form

Big Blue Saw
4.9 stars - based on 32 reviews
Waterjet and Laser Cut Custom Parts.
Address for correspondence only:
3522 Ashford Dunwoody Rd NE #145
Atlanta, GA 30319
Phone: (678) WAY-SAW4 (678) 929-7294