Big Blue Saw Blog
- Parent Category: Big Blue Saw Blog
- Created: Monday, 18 October 2010 05:00
- Written by Simon Arthur
If you've ordered from Big Blue Saw recently, you may have noticed that our logo is stamped on many of the boxes we ship. What you may not have realized is that the stamp that created this logo was itself created using Big Blue Saw's laser cutting.
Here is the laser cutting and engraving the 2 by 4 inch stamp from a sheet of red EVA foam. The stamp measures 2 inches by 4 inches. Our laser has a special setting for cutting stamps so that it leaves a "shoulder" to support the lettering and logo.
I also cut an identically sized piece of white acetal plastic on which to mount the foam.
After assembling the hardware, the foam was attached using hot glue.
Finally, here's our resulting image made using blue ink.