Big Blue Saw - Make a part

Your file was stored on our computer with the name 'A0A0-A0A0-bfly-small.dxf'. Please contact us if you want your part made from a material not shown here.

Width: 1.800 inches (45.72 mm)

Length:
1.950
inches
(49.53
mm)

Choose material:
Show/Hide Metric Values

Acrylic Plastic (22)
- Clear P95 Acrylic (1)
  - Frosted translucent acrylic.
    Material is cut using laser machining.
    0.118 inches 3.0 mm
- Acrylic Plastic, Clear (10)
  - An inexpensive plastic used for decorative purposes and where high strength is not required.
    Material is cut using laser machining.
    0.06 inches 1.5 mm
    0.08 inches 2.0 mm
    0.118 inches 3.0 mm
    0.125 inches 3.2 mm
    0.177 inches 4.5 mm
    0.236 inches 6.0 mm
    0.25 inches 6.3 mm
    0.354 inches 9.0 mm
    0.472 inches 12.0 mm
    0.75 inches 19.0 mm
- Acrylic, Opaque Black (2)
  - Opaque black acrylic, suitable for various decorative, artistic, and architectural purposes.
    Material is cut using laser machining.
    0.118 inches 3.0 mm
    0.236 inches 6.0 mm
- Acrylic, Black/White (1)
  - Opaque engravable plastic, black color with a white background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Red/White (1)
  - Opaque engravable plastic, red color with a white background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Blue/White (1)
  - Opaque engravable plastic, blue color with a white background.
    Material is cut using laser machining. More info...
    0.118 inches 3.0 mm
- Acrylic, Green/White (1)
  - Opaque engravable plastic, green color with a white background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Pumice/Black (1)
  - Opaque engravable plastic, pumice color with a black background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Verde Green Marble/White (1)
  - Opaque engravable plastic, marble design with a white background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Tangerine/White (1)
  - Opaque engravable plastic, rough texture, tangerine color with a white background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Navy Blue/Clear (1)
  - Opaque reverse-engravable plastic, navy blue with a clear background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, White/Clear (1)
  - Opaque engravable plastic, white with a clear background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Black/Clear (1)
  - Opaque reverse-engravable plastic, black with a clear background.
    Material is cut using laser machining. More info...
    0.136 inches 3.5 mm
- Acrylic, Brushed Bright Nickel/Black (1)
  - Opaque engravable plastic, nickel metallic with a black background.
    Material is cut using laser machining. More info...
    0.118 inches 3.0 mm
- Acrylic, Brushed Antique Gold/Black (1)
  - Opaque engravable plastic, gold metallic with a black background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Brushed Copper Penny/Black (1)
  - Opaque engravable plastic, copper metallic with a black background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Brushed Stainless Steel/Black (1)
  - Opaque engravable plastic, stainless steel metallic with a black background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Cashew/Taupe (1)
  - Opaque engravable plastic, cashew with a taupe background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Cinnamon Stick/White (1)
  - Opaque engravable plastic, cinnamon woodgrain with a white background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Kona/White (1)
  - Opaque engravable plastic, kona woodgrain with a white background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Acrylic, Toffee/White (1)
  - Opaque engravable plastic, toffee woodgrain with a white background.
    Material is cut using laser machining. More info...
    0.061 inches 1.5 mm
- Flexible Engravable Acrylic, Silver/Black (1)
  - A flexible engravable plastic useful for signs and labels.
    Material is cut using laser machining.
    0.02 inches 0.5 mm
Mechanical/Structural Plastic (7)
- ABS Plastic, Black (1)
  - A glossy plastic with good tensile strength and stiffness.
    Material is cut using laser machining.
    0.25 inches 6.3 mm
- Acetal Plastic, Black (3)
  - A plastic with good tensile and wear characteristics.
    Material is cut using laser machining.
    0.063 inches 1.6 mm
    0.125 inches 3.2 mm
    0.25 inches 6.3 mm
- Acetal Plastic, White (1)
  - A plastic with good tensile and wear characteristics.
    Material is cut using laser machining.
    0.1875 inches 4.8 mm
- PETG Plastic, Clear (5)
  - A plastic with good tensile strength and impact resistance.
    Material is cut using laser machining.
    0.02 inches 0.5 mm
    0.063 inches 1.6 mm
    0.0938 inches 2.4 mm
    0.125 inches 3.2 mm
    0.25 inches 6.3 mm
- Polycarbonate Plastic, Clear (6)
  - A clear, tough plastic used where tensile strength and impact resistance is important.
    Material is cut using waterjet machining.
    0.06 inches 1.5 mm
    0.125 inches 3.2 mm
    0.1875 inches 4.8 mm
    0.25 inches 6.3 mm
    0.5 inches 12.7 mm
    0.75 inches 19.0 mm
- Polypropylene Plastic, White (1)
  - A fatigue and heat-resistant plastic.
    Material is cut using laser machining.
    0.125 inches 3.2 mm
- UHMW-PE Plastic, White (1)
  - A soft plastic with outstanding toughness and chemical resistance.
    Material is cut using laser machining.
    0.125 inches 3.2 mm
Foam (5)
- EVA Foam, Yellow (1)
  - A lightweight, closed cell foam for a variety of decorative and practical applications.
    Material is cut using laser machining. More info...
    0.22 inches 5.6 mm
- EVA Foam, Green (1)
  - A lightweight, closed cell foam for a variety of decorative and practical applications.
    Material is cut using laser machining. More info...
    0.22 inches 5.6 mm
- EVA Foam, Red (1)
  - A lightweight, closed cell foam for a variety of decorative and practical applications.
    Material is cut using laser machining. More info...
    0.22 inches 5.6 mm
- EVA Foam, Orange (1)
  - A lightweight, closed cell foam for a variety of decorative and practical applications.
    Material is cut using laser machining. More info...
    0.22 inches 5.6 mm
- EVA Foam, Blue (1)
  - A lightweight, closed cell foam for a variety of decorative and practical applications.
    Material is cut using laser machining. More info...
    0.22 inches 5.6 mm
Gasket Material (4)
- Cork Blend (1)
  - Brown cork blended with Buna-N for gaskets or decoration.
    Material is cut using laser machining.
    0.063 inches 1.6 mm
- High Temperature Gasket (1)
  - Oil- and water-resistant gasket for high temperature applications.
    Material is cut using laser machining.
    0.031 inches 0.8 mm
- Treated Paper Gasket (2)
  - Paper-based gasket with some resistance to oils.
    Material is cut using laser machining.
    0.016 inches 0.4 mm
    0.031 inches 0.8 mm
- Buna-N Rubber (1)
  - High temperature, oil resistant rubber.
    Material is cut using laser machining.
    0.0313 inches 0.8 mm
Fabric (13)
- Acrylic Felt, Brown (1)
  - Soft brown acrylic felt, useful for decoration and soundproofing.
    Material is cut using laser machining. More info...
    0.045 inches 1.1 mm
- Acrylic Felt, Red (1)
  - Soft red acrylic felt, useful for decoration and soundproofing.
    Material is cut using laser machining. More info...
    0.045 inches 1.1 mm
- Acrylic Felt, Sky Blue (1)
  - Soft sky blue acrylic felt, useful for decoration and soundproofing.
    Material is cut using laser machining. More info...
    0.045 inches 1.1 mm
- Stiff Acrylic Felt, Black (1)
  - Black acrylic felt, stiffened to lay flat.
    Material is cut using laser machining. More info...
    0.04 inches 1.0 mm
- Stiff Acrylic Felt, Cheetah (1)
  - Cheetah hide pattern acrylic felt, stiffened to lay flat.
    Material is cut using laser machining. More info...
    0.04 inches 1.0 mm
- Stiff Acrylic Felt, Kelly Green (1)
  - Kelly green acrylic felt, stiffened to lay flat.
    Material is cut using laser machining. More info...
    0.06 inches 1.5 mm
- Stiff Acrylic Felt, Pink (1)
  - Pink acrylic felt, stiffened to lay flat.
    Material is cut using laser machining. More info...
    0.06 inches 1.5 mm
- Stiff Acrylic Felt, Zebra (1)
  - Zebra stripe pattern acrylic felt, stiffened to lay flat.
    Material is cut using laser machining. More info...
    0.04 inches 1.0 mm
- Adhesive Polyester Twill, Black (1)
  - Black polyester twill fabric, with light adhesive that can be permanently heat bonded to fabric.
    Material is cut using laser machining. More info...
    0.02 inches 0.5 mm
- Adhesive Polyester Twill, Burnt Orange (1)
  - Burnt Orange polyester twill fabric, with light adhesive that can be permanently heat bonded to fabric.
    Material is cut using laser machining. More info...
    0.02 inches 0.5 mm
- Adhesive Polyester Twill, Cream (1)
  - Cream polyester twill fabric, with light adhesive that can be permanently heat bonded to fabric.
    Material is cut using laser machining. More info...
    0.02 inches 0.5 mm
- Adhesive Polyester Twill, Neon Pink (1)
  - Neon Pink polyester twill fabric, with light adhesive that can be permanently heat bonded to fabric.
    Material is cut using laser machining. More info...
    0.02 inches 0.5 mm
- Adhesive Polyester Twill, Royal Blue (1)
  - Royal Blue polyester twill fabric, with light adhesive that can be permanently heat bonded to fabric.
    Material is cut using laser machining. More info...
    0.02 inches 0.5 mm
Leather (2)
- Leather, Premium Brown (1)
  - Premium medium brown cow leather.
    Material is cut using laser machining. More info...
    0.05 inches 1.3 mm
- Leather, Deertan Saddle Tan (1)
  - Tan colored deertan cow leather.
    Material is cut using laser machining. More info...
    0.06 inches 1.5 mm
Wood (10)
- Wood Laminate, Maple (1)
  - High quality maple laminate, sanded smooth and finished with a clear coat, around a high-density fiberboard core.
    Material is cut using laser machining. More info...
    0.15 inches 3.8 mm
- Wood Laminate, Walnut (1)
  - High quality dark walnut laminate, sanded smooth and finished with a clear coat, around a high-density fiberboard core.
    Material is cut using laser machining. More info...
    0.15 inches 3.8 mm
- Wood Laminate, Black (1)
  - A durable semi-gloss laminate with a high-density fiberboard core.
    Material is cut using laser machining. More info...
    0.27 inches 6.9 mm
- Uncoated Wood Laminate, Birch (1)
  - High quality birch laminate, sanded smooth, around a high-density fiberboard core.
    Material is cut using laser machining. More info...
    0.23 inches 5.8 mm
- Uncoated Wood Laminate, Cedar (1)
  - Aromatic cedar laminate, sanded smooth, around a high-density fiberboard core.
    Material is cut using laser machining. More info...
    0.18 inches 4.6 mm
- Cherry (1)
  - A moderately dense harwood with attractive grain and color.
    Material is cut using laser machining. More info...
    0.15 inches 3.8 mm
- Poplar (1)
  - A fast-growing, flexible, light-colored wood.
    Material is cut using laser machining. More info...
    0.15 inches 3.8 mm
- Red Oak (1)
  - A moderately dense hardwood with attractive grain and color.
    Material is cut using laser machining. More info...
    0.15 inches 3.8 mm
- Medium Density Fiberboard (MDF) (1)
  - A good general purpose engineered wood product.
    Material is cut using laser machining. More info...
    0.25 inches 6.3 mm
- Hardboard (1)
  - A dark, dense, engineered wood product.
    Material is cut using laser machining. More info...
    0.135 inches 3.4 mm
Aluminum (2)
- Aluminum 5052 (4)
  - An alloy that is strong, yet can be formed and bent.
    Material is cut using waterjet machining.
    0.025 inches 0.6 mm
    0.08 inches 2.0 mm
    0.09 inches 2.3 mm
    0.125 inches 3.2 mm
- Aluminum 6061 (16)
  - A good general purpose, high strength aerospace aluminum alloy.
    Material is cut using waterjet machining.
    0.025 inches 0.6 mm
    0.032 inches 0.8 mm
    0.04 inches 1.0 mm
    0.05 inches 1.3 mm
    0.063 inches 1.6 mm
    0.08 inches 2.0 mm
    0.09 inches 2.3 mm
    0.1 inches 2.5 mm
    0.125 inches 3.2 mm
    0.1875 inches 4.8 mm
    0.25 inches 6.3 mm
    0.375 inches 9.5 mm
    0.5 inches 12.7 mm
    0.625 inches 15.9 mm
    0.75 inches 19.0 mm
    1 inches 25.4 mm
Carbon Steel (5)
- Cold Finished Steel 1018 (10)
  - Slightly less strong than cold rolled steel, but with a similar finish.
    Material is cut using waterjet machining.
    0.125 inches 3.2 mm
    0.1875 inches 4.8 mm
    0.25 inches 6.3 mm
    0.3125 inches 7.9 mm
    0.375 inches 9.5 mm
    0.5 inches 12.7 mm
    0.625 inches 15.9 mm
    0.75 inches 19.0 mm
    0.875 inches 22.2 mm
    1 inches 25.4 mm
- Cold Rolled Steel A366/1008 (10)
  - A strong general purpose steel with a clean surface finish.
    Material is cut using waterjet machining.
    0.0239 inches 0.6 mm
    0.0299 inches 0.8 mm
    0.0359 inches 0.9 mm
    0.048 inches 1.2 mm
    0.0598 inches 1.5 mm
    0.075 inches 1.9 mm
    0.09 inches 2.3 mm
    0.105 inches 2.7 mm
    0.12 inches 3.0 mm
    0.135 inches 3.4 mm
- Hot Rolled Steel A36 (10)
  - Typically more economical than cold rolled or cold finished steel, but may have a mill scale covering, and not as strong.
    Material is cut using waterjet machining.
    0.125 inches 3.2 mm
    0.1875 inches 4.8 mm
    0.25 inches 6.3 mm
    0.3125 inches 7.9 mm
    0.375 inches 9.5 mm
    0.5 inches 12.7 mm
    0.625 inches 15.9 mm
    0.75 inches 19.0 mm
    0.875 inches 22.2 mm
    1 inches 25.4 mm
- Hot Rolled Steel 1045 (6)
  - Typically more economical than cold rolled or cold finished steel, but may have a mill scale covering, and not as strong.
    Material is cut using waterjet machining.
    0.25 inches 6.3 mm
    0.375 inches 9.5 mm
    0.5 inches 12.7 mm
    0.625 inches 15.9 mm
    0.75 inches 19.0 mm
    1 inches 25.4 mm
- Hot Rolled Steel A569/ASTM A1011 (5)
  - Typically more economical than cold rolled or cold finished steel, but may have a mill scale covering, and not as strong.
    Material is cut using waterjet machining.
    0.06 inches 1.5 mm
    0.075 inches 1.9 mm
    0.105 inches 2.7 mm
    0.125 inches 3.2 mm
    0.135 inches 3.4 mm
Stainless And Alloy Steel (3)
- Stainless Steel T-304 (9)
  - A good general purpose stainless steel.
    Material is cut using waterjet machining.
    0.06 inches 1.5 mm
    0.09 inches 2.3 mm
    0.12 inches 3.0 mm
    0.125 inches 3.2 mm
    0.1875 inches 4.8 mm
    0.25 inches 6.3 mm
    0.375 inches 9.5 mm
    0.5 inches 12.7 mm
    0.75 inches 19.0 mm
- Stainless Steel 316 (6)
  - A stainless steel for marine and other highly corrosive environments.
    Material is cut using waterjet machining.
    0.06 inches 1.5 mm
    0.12 inches 3.0 mm
    0.125 inches 3.2 mm
    0.25 inches 6.3 mm
    0.5 inches 12.7 mm
    0.75 inches 19.0 mm
- Chrome-Moly Steel 4130 (1)
  - A high strength steel alloy.
    Material is cut using waterjet machining.
    0.125 inches 3.2 mm
Copper (1)
- Copper Alloy 110 (2)
  - A copper alloy suitable for a variety of electronic and decorative purposes.
    Material is cut using waterjet machining.
    0.062 inches 1.6 mm
    0.125 inches 3.2 mm