Ed's BB-8 Internal Drive

This design is from edsjunk.net and forms the internal drive system of a BB-8 droid. Check out Ed's BB-8 Build Guide for details and be sure to stop by the BB-8 Builders Club.

 

Materials:

• 0.25 inch thick aluminum 6061
• Choose another material/thickness

R2 Builders Designs

The designs below come from Astromech.net, the R2 Builders club. You should check the following threads for any updates or tips on using these designs:

• Flatpack Foot Shell Drawings for WaterJetting
• Improved BobC's Holo-projector Mount/Control System top plate
• Flatpack battery boxes for waterjetting

Astromech Holo Projector Mount Top Plate

 

Materials:

• 0.05 inch thick aluminum 5052
• 0.05 inch thick aluminum 6061
• Choose another material/thickness

Battery Box

Materials:

• 0.125 inch thick aluminum 5052
• Choose another material/thickness

Astromech Center Foot with No Tabs

 

Materials:

• 0.125 inch thick aluminum 5052
• Choose another material/thickness

Astromech Center Foot with Tabs

 

Materials:

• 0.125 inch thick aluminum 5052
• Choose another material/thickness

Astromech Outer Foot with No Tabs

 

Materials:

• 0.125 inch thick aluminum 5052
• Choose another material/thickness

Astromech Outer Foot with Tabs

 

Materials:

• 0.125 inch thick aluminum 5052
• Choose another material/thickness

Astromech All 3 Feet with No Tabs

 

Materials:

• 0.125 inch thick aluminum 5052
• Choose another material/thickness

Astromech All 3 Feet with Tabs

 

Materials:

• 0.125 inch thick aluminum 5052
• Choose another material/thickness